Loading…

Logic S

The best solution for your Problem

Logic S is a coating used for insulation. Due to its technical composition, the product penetrates deep into the pores of the substrates. The product is applied with a spray or brush. Logic S must be allowed to dry on the treated surface for 24 hours.

Logic S

5 Liter

Choose your product

Inclusief BTW 21%

Amount :
  • WHY TO USE

  • WHERE TO USE

  • HOW TO USE

LOGIC S

The best solution for your Problem

Because Logic S is drawn deep into the pores, the coating is invisible. Logic S does not clog the pores, but leaves them open so air circulation can proceed. The coating is not only moisture-resistant, but also resistant to different types of liquids such as oil-types and chemicals. In addition, it is an excellent coating on various natural stones. The coating prevents bacteria, funghi and other harmful microorganisms to penetrate the protective layer. Logic S is environmentally friendly and bio-based, guaranteeing your health.

WHY TO USE

LOGIC S

Logic S can be used both indoors and outdoors. The application areas are therefore varied. Terraces, balconies, bathrooms, kitchens, and so on. Logic S is guaranteed for 20 years. Due to the versatility of this product, we are happy to give you personal advice.

WHERE TO USE

LOGIC S

Bacterial and dirt problems in the bathroom

Bacterial and dirt problems in the kitchen

Bacterial and dirt problems in the ground

HOW TO USE

LOGIC S

The application of Logic S is easy. Before application the surface must be clean. You can use a brush or spray when applying Logic S. For horizontal surfaces use a paint roller or spray machine; required 1000 ml for non-absorbent surfaces (granite, etc.) approx. 10 m². For optimum performance, apply 2-4 coats of Logic S on your surface.

How does Logic Isolation work ?

Step 1:

Check Surface and remove excess material.

The application of Logic S is easy. Before application the surface must be clean.

Step 2:

Spray or brush

After cleaning you can use a brush or spray when applying Logic S. For horizontal surfaces use a paint roller or spray machine; required 1000 ml for non-absorbent surfaces (granite, etc.) approx 10 m². For optimum performance, apply 2-4 coats of Logic S on the surface.

Step 3:

Performance time

After spraying and saturating the surface Logic S will be cured after 3 hours.

Step 4:

Test and complete the process

The pores in the foundation walls completely covering . Logic EX has a guaranteed protection of 20 years.

Application Areas

Other Products

Logic UW

Logic UH

Logic DS

LOGIC UH Flex

Logic UW Flex

Logic S

Logic Water

logic EX

Logic DP