Logic UW Flex

The best solution for your Problem

The technical composition of Logic UW Flex makes it possible to easily close even the smallest cracks in the surface. This is important, because water can form in the most tiny cracks and leak into your home. Surfaces treated with Logic UW Flex, absorb movement due to its elasticity. After application with Logic UW Flex your surface is repaired and protected against the formation of new cracks, for a duration of 20 years.

Logic UW Flex

10 litre

Choose your product

Inclusief BTW 21%

Amount :

Add To Cart

WHY TO USE
WHERE TO USE
HOW TO USE

LOGIC UW Flex

Benefits of our Product

The technical composition of Logic UW makes it possible to reach and repair the smallest cracks.

For Experts

WHY TO USE

LOGIC UW Flex

Logic UW Flex consists of Logic UW Flex component A and Logic UW Flex component B. These two components must be mixed together with a mixing ratio of 1:1. When using Logic UW Flex, holes must be made around the cracks. The Logic UW Flex mixture must then be poured into an injection machine. This injection machine pushes the Logic UW Flex mixture with pressure, by means of packers, into the drilled holes.

WHERE TO USE

LOGIC UW Flex

Cracks in tunnels

Cracks in stadiums

Cracks in Bridges

Dilatation

Cracks in underpasses

Cracks in infrastructure

Cracks in stadiums

HOW TO USE

LOGIC UW Flex

Logic UWFlex consists of Logic UW Flex component A and Logic UW Flex component B. These two components must be mixed together with a mixing ratio of 1:1. When using Logic UW Flex, holes must be made around the cracks. The Logic UW Flex mixture must then be poured into an injection machine. This injection machine pushes the Logic UW Flex mixture with pressure, by means of packers, into the drilled holes.

How does Logic Isolation work ?

Step 1 :

Check Surface and remove excess material.

The application of Logic UW Flex is easy. Drill holes every 25 cm so 4 holes each meter.

Step 2 :

Put in packers and press

Put in packers and press in Logic UW Flex.

Step 3 :

injection

After injection let the product fill up the cracks. Approximate usage of 250-500 ml each hole. After curing you can take out the packers and fill up the gaps.