The best solution for your Problem
The technical composition of Logic UW makes it possible to reach and repair the smallest cracks. In case of cracks and or pressure water is involved construction problems occur. This problem usually manifests itself in an emerging water layer.
Benefits of our Product
The technical composition of Logic UW makes it possible to reach and repair the smallest cracks.
LOGIC UW
Logic UW consists of Logic UW – component A and Logic UW- component B. These two components must be mixed together with a mixing ratio of 1:1. When using Logic UW, holes must be made around the cracks. The Logic UW mixture must then be poured into an injection machine. This injection machine pushes the Logic UW mixture with pressure, by means of packers, into the drilled holes.
LOGIC UW
Cracks in the ground
Cracks in the walls
Cracks in the ceiling
Cracks in tunnels
Cold joints
Cracks in the elevator shaft
LOGIC UW
Logic UW consists of Logic UW – component A and Logic UW- component B. These two components must be mixed together with a mixing ratio of 1:1. When using Logic UW, holes must be made around the cracks. The Logic UW mixture must then be poured into an injection machine. This injection machine pushes the Logic UW mixture with pressure, by means of packers, into the drilled holes.
The application of Logic UW is easy. Drill holes every 25 cm so 4 holes each meter.
Put in packers and press in Logic UW.
After injection let the product fill up the cracks. Approximate usage of 250-500 ml each hole. After curing you can take out the packers and fill up the gaps.
Test the surface and complete the process. Logic UW has a guaranteed protection of 20 years.