LOGIC UH Flex

The best solution for your Problem

Logic UH Flex is a strong bond for surface cracks and joint cracks. A Logic-UH Flex barrier can also be formed in case of openings that cause any moisture problems between the wall and the foundation.

LOGIC UH Flex

10 litre

Choose your product

Inclusief BTW 21%

Amount :

Add To Cart

WHY TO USE
WHERE TO USE
HOW TO USE

LOGIC UH Flex

Benefits of our Product

The technical composition of Logic UH Flex makes it possible to prevent the evaporation of water in concrete and to protect against sulphates that cause pressure, resulting in expansion cracks. Your surface is protected against cracking for a long time after treatment with Logic UH Flex.

For Experts

WHY TO USE

LOGIC UH Flex

The expansion of your concrete floor or columns creates a lot of pressure on the surface. Because this expansion shows a lot of movement, cracks appear in the concrete. Logic UH Flex is an elastic sealing mortar that adapts to movement. That means that cracks are easily repaired and your concrete surface is protected by the elasticity of Logic UH Flex.

WHERE TO USE

LOGIC UH Flex

Cracks in lower and upper

Reinforcement in columns

Cold joints

Dilatation

Grating edges

Pipe edges

structures

HOW TO USE

LOGIC UH Flex

Mixing ratio A:B = 1:1 and mix with sand. Break open the crack and pour the Logic UH Flex mixture in the crack. When dealing with large expansion cracks, a wooden form must be made into which the Logic UH+ mixture can be poured. This wooden form holds the mixture in place. After 24 hours the Logic UH Flex has dried and the form can be removed.

How does Logic Isolation work ?

Step 1 :

Check Surface and remove excess material.

The application of Logic UH Flex is easy. Open/break up the to be treated surface.

Step 2 :

product preparation and push holes

Prepare Logic UH Flex by mixing component A, component B and sand in the wished ratio to make it as flexible as needed. The flexibility variates from 5-15%. Use a construction mixer until the mortar is mixed well.

Step 3 :

Pour mortar in the to be treated surface

Pour mortar in the gap or other to be treated surface and let it cure. When dealing with large expansion cracks, a wooden form must be made into which the Logic UH Flex mixture can be poured. This wooden form holds the mixture in place. After 24 hours the Logic UH Flex mixture has dried and the form can be removed.