• 0

Logic Water

The best solution for your Problem

Logic Water is a moisture-resistant sealant specially designed to tackle capillary moisture issues. This product push out the trapped moisture from the pores of the wall, allowing it to evaporate. The advanced technical composition of Logic Water allows it to repel water while still facilitating air circulation, maintaining a healthy and moisture-free environment.

Logic Water

Logic Water

Litre
$ 17

Depending on country but for English. Incl. VAT 21% + cargo cost

Add To Basket
  • WHY TO USE LOGIC WATER

  • WHERE TO USE LOGIC WATER

  • HOW TO USE LOGIC WATER

LOGIC WATER

LOGIC WATER

Benefits of our Product

Thanks to the advanced technical composition of Logic Water, it can effectively reach and eliminate years of moisture and water accumulation. Such long-term moisture exposure often leads to surface leakage and rotting. With Logic Water, you can address these issues and ensure a dry and protected surface.

Biobased products based on Pico Technology

Pico Technology is based on a technology 1000 times smaller than Nano. Pores are available in different surfaces and vary in sizes. This means we can reach the pores deeper than others and can offer a better protection. This comes with a long-term warranty of 20+ years. With our technology we make sure that the building material is protected against water and moisture but at the same time let´s air go through. Air circulation is important for a healthy environment and makes the life span of the material longer. Biobased technology is the future! The world is getting more conscious and cares more about earth. It is our responsibility to take care and make sure we don´t harm. We as Logic Chemie keep developing our products and make sure that our products are as biobased and durable as possible.

Biobased products based on Pico Technology

WHY TO USE

LOGIC WATER

Rising damp is a common problem where water enters the foundation of a home through the crawl space or basement, or seeps through the walls. This happens due to groundwater penetrating the masonry, leading to damp walls. To effectively combat rising damp, Logic Water injections offer an excellent water insulation solution.

Logic Water, a liquid product, is applied to the foundation of the walls using a drip system. Its unique technical composition allows it to deeply penetrate and nestle within the pores of the wall. Once nested, Logic Water creates a surface tension that repels water and promotes its evaporation from the walls. Additionally, the presence of air circulation within the pores further aids in the drying process of the walls, ensuring an efficient and long-lasting solution against rising damp.

About us

WHERE TO USE

LOGIC WATER

  1. Resolving pressurized water problems in basement floors.
  2. Addressing water problems on the ground floor of buildings.
  3. Managing pressurized water issues in tunnels.
  4. Tackling water problems in different types of stone surfaces.

HOW TO USE

LOGIC WATER

To begin the process, holes are drilled in the wall at 25 cm intervals. Subsequently, bottles filled with Logic Water are placed into the drilled holes. These bottles should remain in the walls for at least 24 hours, allowing the wall to thoroughly absorb the liquid through drops of Logic Water. After the 24-hour period, the bottles can be removed, and the drilled holes can be sealed using mortar.

About us

How does Logic Insulation work ?

Step 1:
Step 1:

Thorough Surface Inspection and Preparation

Initiate the application process by conducting a detailed inspection of the surface. Removing any superfluous materials is imperative for a clean and ready surface, which significantly enhances the effectiveness of Logic Water. This foundational step is crucial for a successful application.

Thorough Surface Inspection and Preparation
Step 2:
Step 2:

Strategic Drilling for Optimal Logic Water Application

For a uniform application, drill holes at regular intervals of 25 cm across the surface, amounting to four holes per meter. This precise and consistent method ensures even distribution and deep penetration of Logic Water, optimizing its performance.

Strategic Drilling for Optimal Logic Water Application
Step 3:
Step 3:

Efficient Insertion of Bottles or Packers

Post-drilling, proceed to insert bottles or packers into each hole. For practicality, 500 ml bottles are designed for direct insertion. For larger quantities, such as 5-liter bottles, use specialized injection devices to facilitate the process, ensuring effective delivery of Logic Water into the surface.

Efficient Insertion of Bottles or Packers
Step 4:
Step 4:

Comprehensive Soaking and Saturation

Post-injection of Logic Water, allow sufficient time for it to be fully absorbed. This process can vary from 1 to 7 days, influenced by the type of surface and environmental conditions. On average, each hole will require about 200-250 ml of Logic Water. After the absorption phase, remove the bottles or packers and seal any remaining gaps.

Comprehensive Soaking and Saturation
Step 5 :
Step 5 :

Detailed Quality Check and Application Monitoring

To confirm a successful Logic Water application, maintain a consistent drilling pattern of a hole every 25 cm. This results in four holes per meter, ensuring a controlled and efficient distribution of Logic Water for superior surface treatment.

Detailed Quality Check and Application Monitoring

Application Areas

Water problems behind tiles
Water problems in basement
Water problem in tunnel
Water problem in ground floor
1234567
Other Products

Other Products

Logic UH
Logic UH

Logic UH

 Logic UW
 Logic UW

Logic UW

Logic DS
Logic DS

Logic DS

Logic DP
Logic DP

Logic DP

Logic DP+
Logic DP+

Logic DP+

Logic UW Flex
Logic UW Flex

Logic UW Flex

Logic UH Flex
Logic UH Flex

Logic UH Flex

Logic EX
Logic EX

Logic EX

Logic Water
Logic Water

Logic Water

Logic S
Logic S

Logic S