• 0

Logic DP

The best solution for your Problem


Logic DP is an epoxy resin coating substrate that effectively penetrates the surface up to a depth of 150 mm. This exceptional product boasts resistance to a wide array of elements, including water, mineral oil, solvents, acids, salts, combustible gases, adverse weather conditions, erosion, hydrostatic pressure, and more.

About us

Logic DP

For inquiries and to request a quote, please don't hesitate to get in touch with us. At Logic Chemie, our utmost priority is to ensure the correct and optimal utilization of our products in various technical applications. By working together, we can unlock the full potential of our products, leading to the best possible results.

send Message send Message
  • WHY TO USE LOGIC DP

  • WHERE TO USE LOGIC DP

  • HOW TO USE LOGIC DP

LOGIC DP

LOGIC DP

Benefits of our Product

Logic DP is a transparent coating that seamlessly integrates with the surface. Its unique ability to nestle within the surface, rather than sitting on top of it, provides superior protection against water and pressure. Applying Logic DP is a straightforward process, easily accomplished with a brush. After curing, Logic DP leaves no visible traces, ensuring a clean and unblemished surface.

WHY TO USE

LOGIC DP


If your surface is consistently exposed to water and subjected to natural movements that apply pressure, it is crucial to select an insulation that is both moisture resistant and capable of withstanding movements. This is where Logic DP excels, serving as an innovative coating that offers top-notch protection for your surface. Being transparent, Logic DP seamlessly integrates with the surface, providing effective shielding against water and pressure. The application of Logic DP is straightforward and can be accomplished effortlessly with a brush. Moreover, after curing, Logic DP leaves no visible traces on your surface, ensuring a clean and unblemished appearance.

About us

WHERE TO USE

LOGIC DP

  • Roof waterproofing and water leaks.
  • Insulating building foundations.
  • Water tank insulation
  • Pool insulation for temperature maintenance and minimizing water loss.
  • Insulating wet volumes to safeguard against moisture-related issues.
  • Strengthening and protecting airport (runways)
  • Reinforcing structures and infrastructure to enhance their longevity.

HOW TO USE

LOGIC DP

Logic DP is a two-component product comprising Components A and B, which must be mixed in equal proportions. Once thoroughly mixed, Logic DP can be effortlessly applied using a paintbrush. Ensure the even distribution of the Logic DP mixture over the intended surface, and allow it to dry for 24 hours.

About us

How does Logic Insulation work ?

Step 1 :
Step 1 :

Initial Surface Preparation

Begin your Logic DP application journey with a thorough surface inspection and cleaning. It's imperative to remove all excess material, ensuring the surface is perfectly clean and ready for treatment. This foundational step is key to the successful application of Logic DP.

Initial Surface Preparation
Step 2 :
Step 2 :

Mixing Logic DP Components for Optimal Consistency

Prepare Logic DP by combining Component A and Component B in an equal 1:1 ratio. Use a reliable construction or paint mixer to achieve a thorough, homogenous mix of the components, essential for a consistent and effective application.

Mixing Logic DP Components for Optimal Consistency
Step 3 :
Step 3 :

Efficient and Effective Logic DP Application

Apply Logic DP using a paint roller for an even and smooth layer. Achieving full saturation is crucial for the product's effectiveness. For low-porous surfaces, a two-coat treatment is typically sufficient for complete protection. In contrast, highly porous surfaces require deeper penetration of Logic DP. Start with the first coat and then apply additional coats at 15-30 minute intervals. Depending on the surface's porosity, this process might be repeated 5 to 6 times to ensure maximum protection.

Efficient and Effective Logic DP Application
Step 4:
Step 4:

Drying Time and Additional Coating for Enhanced Protection

Allow approximately 3 hours for Logic DP to penetrate and dry on the surface. After the first coating has dried, apply a second layer. For low-porous surfaces, a third layer may be necessary to ensure the best protective outcome.

Drying Time and Additional Coating for Enhanced Protection

Application Areas

alt image
alt image
alt image
alt image
alt image
alt image
1234567
Other Products

Other Products

Logic UH
Logic UH

Logic UH

 Logic UW
 Logic UW

Logic UW

Logic DS
Logic DS

Logic DS

Logic DP
Logic DP

Logic DP

Logic DP+
Logic DP+

Logic DP+

Logic UW Flex
Logic UW Flex

Logic UW Flex

Logic UH Flex
Logic UH Flex

Logic UH Flex

Logic EX
Logic EX

Logic EX

Logic Water
Logic Water

Logic Water

Logic S
Logic S

Logic S