• 0

Logic UW

The best solution for your Problem

Logic UW's advanced composition enables it to effectively detect and mend even the tiniest cracks. When cracks are present, especially under pressure or involving water, construction issues may arise, typically leading to the formation of unwanted water layers.

Logic UW cracks repair

Logic UW

For inquiries and to request a quote, please don't hesitate to get in touch with us. At Logic Chemie, our utmost priority is to ensure the correct and optimal utilization of our products in various technical applications. By working together, we can unlock the full potential of our products, leading to the best possible results.

send Message send Message
  • WHY TO USE LOGIC UW

  • WHERE TO USE LOGIC UW

  • HOW TO USE LOGIC UW

LOGIC UW

LOGIC UW

Benefits of our Product

Logic UW is expertly crafted for effective crack repair, especially in pressure or water-involved scenarios. Its advanced formula targets the smallest cracks, preventing construction issues like unwanted water layers and ensuring structural integrity. Designed for challenging environments, its unique injection process with packers allows for deep, effective crack penetration, making Logic UW ideal for pressurized conditions and a broad range of repair needs.

WHY TO USE

LOGIC UW

Logic UW is an ideal choice for repairing small cracks, which are often challenging to detect and fix using standard methods. It excels in demanding conditions, including areas affected by water or under significant pressure, where conventional repair techniques may fall short. Providing a durable, long-term solution, Logic UW effectively seals cracks, enhancing the overall longevity and structural integrity of buildings. The application of Logic UW is user-friendly, requiring only standard equipment like an injection machine, thus simplifying the process for professional use. Moreover, its design, aimed at addressing both common and complex construction issues, aligns with current environmental and safety standards, contributing to the sustainability and safety of structures.

Which method is better for waterproofing ?

WHERE TO USE

LOGIC UW

  1. Ground cracks
  2. Wall cracks
  3. Ceiling cracks
  4. Tunnel cracks
  5. Cold joints
  6. Cracks in elevator shafts

HOW TO USE

LOGIC UW

Logic UW is composed of two components: Logic UW – component A and Logic UW – component B. It is crucial to blend these two components in a 1:1 mixing ratio. When applying Logic UW, it is necessary to create holes around the cracks. Subsequently, the Logic UW mixture should be introduced into an injection machine. This injection machine utilizes packers to exert pressure on the Logic UW mixture and inject it into the pre-drilled holes.

About us

How does Logic Insulation work ?

Step 1 :
Step 1 :

Preliminary Surface Check and Debris Removal

Before starting, ensure the surface is free of excess materials. This is a crucial step for a smooth Logic UW application process.

Preliminary Surface Check and Debris Removal
Step 2 :
Step 2 :

Strategic Drilling for Logic UW Application

Initiate by drilling holes at a height of 12.5 cm, angling them at 45 degrees, spaced every 25 cm in width. For the second layer, drill at a height of +25 cm, placing holes in a crossed pattern for optimal coverage. This results in four holes per meter, ensuring uniform distribution.

Strategic Drilling for Logic UW Application
Step 3 :
Step 3 :

Installing Injection Packers

Carefully place injection packers in the prepared holes. This step is essential for the successful injection of the Logic UW resin.

Installing Injection Packers
Step 4 :
Step 4 :

Logic UW Preparation

Create the Logic UW mixture by combining Component A and Component B in a 1:1 ratio using the designated machine. This precise mixture is key for optimal performance.

Logic UW Preparation
Step 5 :
Step 5 :

Injection Hose Setup and Logic UW Injection

Connect the injection hoses from the machine to the packers. Inject the prepared resin mixture at 60 bar into the holes until each is saturated, ensuring thorough coverage.
Typically, each hole will require between 250-500 ml of the mixture. 

Injection Hose Setup and Logic UW Injection
Step 6 :
Step 6 :

Completing the Process with Hole Sealing

After the resin has set, remove the packers and fill the holes with cement or a suitable repair mortar, marking the completion of the application process.

Completing the Process with Hole Sealing

Biobased products based on Pico Technology

alt image
alt image
alt image
alt image
alt image
alt image
alt image
1234567
Other Products

Other Products

Logic UH
Logic UH

Logic UH

 Logic UW
 Logic UW

Logic UW

Logic DS
Logic DS

Logic DS

Logic DP
Logic DP

Logic DP

Logic DP+
Logic DP+

Logic DP+

Logic UW Flex
Logic UW Flex

Logic UW Flex

Logic UH Flex
Logic UH Flex

Logic UH Flex

Logic EX
Logic EX

Logic EX

Logic Water
Logic Water

Logic Water

Logic S
Logic S

Logic S